Want to find out how to get rid of the smell of sewage ejector pump odor in your house or basement? Is there any location that you haven’t considered that can be smelled? We’ll talk about every part of your home and when you should call a professional. We’ll tell you which of these remedies you can undertake on your own and which ones require professional aid.
Why does the smell come from your Sewage Ejector Pump Odor?
There are many things that could be making your sewage ejector pump odor stink. Let’s talk about what’s causing this smell, and then we’ll talk about what you can do to fix it.
- The pump is old and hasn’t been taken care of properly. This could happen if you just bought the property or got a new management company.
- The pump wasn’t put in the right way.
- The sink needs to be cleaned because it is dirty.
- People are throwing away things that shouldn’t go into the sewage system in the wrong way. This category comprises diaper wipes, face wipes, feminine hygiene items, paper towels, cat litter, cooking oil, and garbage that belongs in other bins.
- The impeller of the pump is clogged or broken.
- Something is wrong with the pump’s electrical system.
In other words, the sink won’t drain because of a faulty or blocked flotation sensor.
- The seal around the basin is bad or has been broken.
- Somewhere in the system, there is a leak.
- The pump needs to be worked on to get rid of scale, change the oil, etc.
- The hole for the vent is plugged.
- The sewage pipe is clogged further downstream from the pump.
How to get rid of the sewage ejector pump odor smell in your house?
Getting rid of a sewer smell in your house is as simple as cleaning out the overflow hole under or across your faucet when the water level rises too high. When hair, bacteria, and other disgusting things accumulate, the area might begin to smell.
Use a tiny bottle brush to remove filth or a water and chlorine bleach solution to kill bacteria. Caulk around the toilet base if you see any water leaking from the base of your toilet. Apply new caulk at the base, wipe away any water or dirt, apply new caulk, and use your finger to scoop off any extra caulk, making the seal stronger.
1. Look at the wax ring around the toilet
Your toilet connects to the floor at a place called the toilet flange. Then, that goes into the drainpipe. There is a wax ring seal between the toilet and the flange. As long as this seal is loose, sewage ejector pump odor gas might leak into your home. This seal can also dry out and cause trouble. If it’s broken, take the toilet out and change the ring.
Bacteria grow in clogged drains
When a drain is clogged with hair, skin, soap scum, or waste, you’ve created the perfect place for nasty bacteria to grow. Simple solutions like a plumbing snake, baking soda and vinegar, or a cleaner that uses enzymes can work. Avoid using a liquid drain cleaner since it might corrode your pipes and cause them to burst.
There may be guest rooms that have baths and sinks that aren’t being utilized, so check them out. That could be the reason why your home smells like sewage. The toilet trap also called a “P-trap,” holds a small amount of water so that odors don’t get in.
Over time, that water can dry up, letting gas in. It can be fixed by flushing the toilet or turning on the sink. This can also happen with drains that aren’t used. Pour one gallon of water down the smelly drain. This should fill up the trap again and get rid of the smell.
3. Check for leaks
A sewage smell is almost always caused by pipes that leak. Gases flow through sewer pipes, so if there is a leak, you can be sure that it will smell. Even the smallest cracks can cause the biggest problems. Get them fixed as quickly as possible, and remember to look for a plumber that works for your schedule.
How to stop your basement from smelling like sewage ejector pump odor
An ejector pump may be installed in your basement’s bathroom or laundry area. Sewers use gravity, so a pump is needed in the basement to get to the sewer line. So, the ejector pump helps waste get where it needs to go.
The pump is in the ejector pit, which is also called a sump basin. It needs to be properly sealed and aired out. If you see anything that looks broken or cracked, that’s where sewer gas is coming in. If the seal is tight and the pit has a vent, the problem could be a real part. Something is broken or isn’t there.
This problem may need the help of a professional. Remember that a sump pump is different from an ejector pump. The sump pump is used to prevent flooding in areas where houses are below the water table line. The ejector pump is used to help remove sewage by sending it up and out.
Ejector pumps assist in evacuating sewage ejector pump odor from regions where the water table is lower than the house’s foundation, while sump pumps prevent floods in areas where the water table is above the foundation. But this trap has a part that can get around the water trap.
There is a small plug that keeps the sewer gas from coming up. When you clean the drain, you have to put this plug back in place. If it’s broken or gone, you can buy a new one at any hardware or plumbing store. Just ask for a plug to drain the water.
How To Keep Your Sewage Ejector Pump Odor In Good Shape
Basically, your sewage ejector pump odor is a big hole in the floor. All of the garbage generated by the plumbing fittings may be found in this particular hole.
The used water will then be pumped into a drain where it will leave your plumbing system. This, of course, can make the room smell if it isn’t cleaned well or often enough.
As long as you know what to do, it shouldn’t be hard to keep your sewage ejector pump odor clean.
1. Toss it out
As a result of this belief, many individuals’ flush items down the toilet without a second thought. This doesn’t always happen. You shouldn’t even be tempted to do this if you keep a trash can near your toilet.
Condoms and feminine hygiene products are two of the most common things that people flush down the toilet. But if you flush these, your system will quickly back up because they are not meant to be flushed. This can’t be cleaned, so the whole pump will have to be taken out and replaced.
2. Keep your grinder pump in good shape
If you keep your grinder pump clean, your whole system will run better. This is a pretty easy task that doesn’t cost much time or money. Most likely, you won’t even need to go out and buy anything else.
Lemon juice flushed down the toilet will help break up any clogs and keep the grinder pump clean and working well. It will also cut down on smells that come from things left in the grinder between flushes.
3. Perform annual maintenance
Having a plumber visit your home once a year for routine maintenance is a smart idea.
This way, you won’t have to worry about having to pay extra if you need them to come out quickly. They will be able to clean out all the things in your body that you wouldn’t be able to do on your own.
4. Know what’s wrong
It’s important to know when something bad is going to happen. Most of the time, the first sign will be a strong smell of sewage. Plumbers are, of course, the best option since they have the training and tools to deal with a wide range of circumstances. But if you feel like you want to deal with it, it is possible.
5. Inspect the Vent
All sewage ejector pump odor will have a local vent that is built-in. This leads to the hole outside, but it has nothing else attached to it. This is the first place to look if something goes wrong.
You will need to block the vent so that the smell stays in the pit. Make sure the lid of the pit has rubber seals, as this is what will keep the lid in place. Also, make sure that the discharge and the vent line are sealed.